Welcome to the Bluejay family! Follow this guide to get your bike ready for the road and to ensure a safe, smooth ride every time.
Pre-Ride Safety Inspection
Before each ride, inspect your bike thoroughly. If you’re unsure about anything, consult a qualified electric bike mechanic.
1. Front Wheel Quick-Release
-
Before every ride, ensure the quick-release lever on the front wheel is securely fastened.
-
Pull the lever—if it opens easily, tighten the nut on the opposite side, then close the lever firmly.
2. Brakes
-
Squeeze each brake lever individually while walking the bike to ensure it stops smoothly.
-
Levers should feel firm, not spongy.
3. Wheels and Tires
-
Check that tires have good tread, no bulges, and no damage.
-
Wheels should spin true (no wobbles or dents).
-
Spokes should be tight and intact.
4. Steering
-
Handlebars and stem should be properly aligned and securely tightened.
-
Make sure the steering feels smooth and responsive.
5. Chain
-
The chain should be clean, properly lubricated, and move smoothly.
-
Maintain frequently in wet, salty, or dusty environments.
6. Cranks and Pedals
-
Pedals must be securely tightened.
-
Cranks should be firm, not bent, and securely connected.
7. Battery
-
Charge the battery fully before use.
-
Lock it securely into the frame using the key.
-
Avoid charging in wet or damp environments.
8. Electrical Cables
-
Make sure all connectors are fully seated, clean, and dry.
-
Inspect for any damage.
-
Check that the headlight and taillight are unobstructed and functional.
9. Accessories & Gear
-
Check that reflectors, racks, and all fittings are secure.
-
Always wear a helmet and any other required safety gear.
Initial Setup Before Your First Ride
Front Wheel Quick Release
-
Verify that the quick-release lever is securely in place.
-
Pull the lever—if it opens easily, tighten the nut on the opposite side, then close the lever firmly.
- How To: Remove the Front Wheel
Wiggle Check
-
Stand over the bike (without sitting).
-
Hold both brake levers and rock the bike back and forth.
-
If you feel any play, re-check the quick release and then check the stem.
Check Stem Tightness
-
Ensure the four bolts on the faceplate are tight.
-
Tighten the top black bolt and confirm the handlebars are aligned with the front wheel.
Getting to Know the Controls
Powering On
-
Hold the power button at the top of the screen to turn the bike on.
-
The bike will start at Assist Level 1.
Adjusting Pedal Assist
-
Tap the top of the screen to increase the assist level.
-
Tap the bottom of the screen to decrease the assist level.
-
Numbers at the bottom of the screen show your current level.
Turning Lights On/Off
-
Hold the top left corner of the screen for 3–5 seconds to turn lights on/off.
-
Lights turn on automatically in the dark.
Using Walk Mode
-
Set assist to 0.
-
Press down once more to reveal walk mode icon.
-
Hold the bottom of the screen to engage walk mode.
-
Release to stop walk mode.
Shifting Gears
-
On the right handlebar, you’ll find the gear shifter.
-
There are two levers:
-
The top lever lowers the gear (easier to pedal).
-
The bottom/back lever raises the gear (harder to pedal).
-
Always shift gears while riding for smooth transitions.
-
Most riders find gears 4 and 5 to be the most comfortable for cruising.
You're Ready to Ride!
Make it a habit to run through this guide before each ride to keep your Bluejay running at its best and to ensure your safety. If you ever have questions, we're here to help at support@bluejaybikes.com
Ride safe and enjoy the journey.
—The Bluejay Team
